- Home
- Equipment
Refine by
Ultra Check Environmental Equipment & Supplies
7 equipment items found
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
This unit also utilizes a Slide Plate with Buna N or Viton Well Gasket, a PTFE Zero Gap Two Pole Wiper, a PTEF or Aluminum or SS Pole Sleeve / ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
Ultra Check’s Drip Sink is a Gauge Pole Float Basin that helps control the mess that occurs when floats are pulled, gauging takes place, and samples are taken. Product residue drips into the sink and drains back into the tank. The Drip Sink is made of aluminum and is bolted to the gauge pole ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
Ultra Check’s Fixed Plate Adapter is the solution to the problem of tanks that do not have a fixed plate welded to the top of the gauge pole well where it passes through the roof and therefore will not normally accept emission control devices. Ultra Check, Inc. will in this case design and custom build a Fixed Plate Adapter to suit your needs. The Fixed Plate Adapter is split and can be ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
Ultra Check’s Tall Float for the gauge pole consists of a Float (canister), Reel, Stainless Steel Guide Cable, Guide Cable Weight, Triple Seal Assembly, Single Seal and the ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
The Hollow Float systems are used to seal the inside of gauge poles that have automatic tank gauging devices using either a Displacer or Radar to sense the level of the product, and in some cases the water level at the bottom of the tank. The Displacer Type Hollow Float is designed to seal the gauge pole, act as a secondary stilling well, and allow the displacer to operate without ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
There are several variations of Ultra Check Safe Sleeves and they are all special designed and custom built to the customer's specifications: Our Ladder / Gauge Pole Combination Sleeve/Seals (Ladder Seal) or Ladder Style Safe Sleeve (two-pole) Has an Aluminum or SS Slide Plate with a Buna-N or Viton Well Gasket to seal the ladder well opening, a PTFE Zero Gap Two Pole Wiper with a PTFE or ...
Manufactured by:Ultra Check, Inc. based inAtlantic Beach, FLORIDA (USA)
Ultra Check's Safe Sleeve is a complete gauge pole seal unit that seals the outside of gauge poles (guide pole) and the deck / well opening. This system alone provides a 96% reduction in emission losses, but combined with a Float system it provides a 99% loss reduction. The Standard Safe Sleeve is a gauge pole emission control system that includes an aluminum or Stainless Steel Slide Plate with a ...